Versalift – VST-6000-SI, mounted on MAN 4x4 18t chassis
Request the Offer
Fisa Tehnica VST-6000-SI [ro]-
Inaltime de lucru (m): 19.90 -
Regim de lucru lateral (m): 10.70 -
Alimentare: diesel
Platform for working at height (PRB platform), with telescopic + articulated arm, insulated at 69 kV, Versalift model – VST-6000-SI, mounted on MAN 4x4 18t chassis
Technical specifications of the superstructure:
− Maximum working height: 19.90 m;
− Height at the base of the platform: 17.90 m;
− Lateral working range: 10.70 m;
− Set of 2 independent platforms, made of fiberglass, platform dimensions: 609.6 x 762.0 x 1,066.8 mm (24 x 30 x 42 inches), insulated at 69 kV, certified by the manufacturer;
− Platform load: 130 kg in each platform;
− Platform rotation: 100 for each platform, in one direction;
− Access stairs in each nacelle, both on the outside of the nacelle and on the inside of the nacelle;
− Jib crane, mounted between the two nacelles, with a maximum load of 454 kg;
− Jib length: between 50 cm and 155 cm, with hydraulic extension and locking in 3 positions;
− Telescopic + articulated arm, made of fiberglass, insulated at 69 kV;
− Arm articulation additionally reinforced;
− Telescopic arm in 2 sections;
− Turret rotation: continuous;
− Mounting system: A+A (inclined front/rear), with the possibility of mounting on slopes of 10 longitudinal/ 5 transverse;
− Electric hoses and cables are protected, being positioned on the inside of the arm;
− The hydraulic system must be open circuit;
− Hydraulic pump for activating the platform for working at height, which only works with the handbrake pulled, with an automatic deactivation system in case of handbrake disengagement;
− The arm rotation mechanism is tightly protected against the penetration of foreign bodies (stones, screws, etc.);
− The arm construction allows access to the platform from the ground;
− Movement alarm device;
− Self-locking of the platform controls when using the arms;
− Arm locking system, in case of improper positioning;
− Hydraulic control of the arm is done both from the platform and from the base;
− Hydraulic control of the arm is done from the platform, through a joystick that can accumulate several movement controls;
− Engine stop/start button in the platform;
− Manual acceleration control from the platform;
− Emergency stop button at the base of the platform and on the platform control panel;
− Platform horizontal leveling system;
− Multifunctional levers will be protected with impact-resistant materials;
− Each platform will be equipped with a rectangular tool box made of high-density polyethylene, resistant to engine oil, hydraulics, as well as to cold and UV radiation;
− Each platform will have a tarpaulin to protect the platform during movement;
− Hydraulic installation with coupling system on board the vehicle with indication of its connection
− Operating hours indicator (hour meter);
− Hydraulic cylinders with safety valves installed on each cylinder;
− Control distributors;
− Hydraulic oil tank, hydraulic filter;
− Stabilizers with possibility of independent or synchronous hydraulic control;
− Electric hydraulic pump for lowering the platform in case of emergency;
− Hydraulic system equipped with safety valves, with balancing and blocking valves at all couplings;
− Movement control valves for each actuating cylinder;
− Resistant metal structure, equipped with access ladder and non-slip floor;
− Metal structure equipped with grounding point (electrical connection to earth);
− The mounting system and the tight platform arm (in the transport position) provide stability to the assembly and are optically signaled with reflective markings;
− The control levers at the base of the superstructure will be protected in a metal box;
− Connection for hydraulic tools in the platform;
− Tool boxes, made of fiberglass/aluminum, mounted on the platform, on both sides of the boom, dimensions ≈ 4,000 x 630 x 1,005 mm (L x w x h)
Technical specifications of the chassis:
− Special chassis truck, model MAN TGM 18.290 4x4 BB CH, standard equipment;
− Single cabin;
− Wheelbase: 3,900 mm;
− 4x4 traction;
− Engine
o Diesel;
o Engine power: 290 HP/ 213 kW;
o Pollution standard: EURO 6;
− Capacities & Weights
o Maximum authorized total weight (including equipment): 18,000 kg;
o Chassis weight: 6,050 kg;
o Chassis available load: 11,950 kg;
o Maximum permissible mass of axle 1: 7,500 kg;
o Maximum permissible mass of axle 2: 11,500 kg;
o Unladen mass (including machine): 12,270 kg (without driver, passenger, fuel);
o Kerb weight (including machine): 12,580 kg (driver + passenger + fuel);
o Remaining available load: 5,730 kg (without driver, passenger and fuel);
o Remaining available load: 5,420 kg (with driver, passenger and fuel);
− Ground clearance:
o front axle: 334 mm;
o between axles: 413 mm;
o rear axle: 334 mm;
− Braking system:
o Electronic braking system;
o ABS, ASR, ESP, EBS
o Traction control system;
− Steering:
o Power steering
o Adjustable steering wheel
